Winter Equipment Blog

Articles pertaining to the Winter Equipment Company news, snow removal technologies, and events in the municipal snow removal community.

Land Grading: Tips for Using Road Graders

According to The U.S. Department of Transportation’s Bureau of Statistics, 35% of all roads in the United States are unpaved as of 2012. That equates to 1.42 million miles of road!

This entry was posted in road maintenance, Graders, Milling Tools, Tips on July 31, 2018 by Anne Brower

Carbide-Tipped Road Grading Systems Outperform Standard Blades

Gravel roads have 3 main elements.

  1. A crowned driving surface
  2. A shoulder area that slopes directly away from the edge of the driving surface
  3. A ditch

The basic shape of the cross section must be correct, or a gravel road will not perform well, even under very low traffic. 

This entry was posted in road maintenance, Milling Tools, Graders on July 3, 2018 by Anne Brower

6 Types of Road Maintenance

According to the Federal Highway Administration (FHWA), There are approximately 4,071,000 miles (6,552,000 km) of roads in the United States, with 2,678,000 miles (4,310,000 km) paved and 1,394,000 miles (2,243,000km) unpaved.

Keeping these roads in working condition requires a ton of maintenance. Depending on the health of the road, varying degrees of upkeep are required. Here are six types of road maintenance that can be used for each job.

This entry was posted in road maintenance, Graders, Milling Tools on June 26, 2018 by Anne Brower

Ground Engaging Tools: What is a Scarifier?

A scarifier is used for tearing up pavement, or when a gravel road surface is too hard for a standard motor grader blade to cut through. It can also be used to break up packed ice and asphalt. 

Scarifying can be done by attaching extremely strong “teeth” to the grader that dig into hard surfaces without damaging the grader blade.  It has 11 removable teeth that can be adjusted to cut a maximum depth of 12 inches.  There are options to use both scarifier teeth and tools depending on the job. 

This entry was posted in road maintenance, Graders, Milling Tools on June 19, 2018 by Anne Brower

Road Repair Techniques: Repairing vs. Reshaping

Gravel roads are farm to market roadways.  As traffic has increased and gravel roads become more prevalent and are carrying larger loads it’s imperative to follow good maintenance protocol to keep roads safe and stable. You can think about gravel road maintenance in two categories: repairing and reshaping.

This entry was posted in road maintenance, Milling Tools, Graders on June 5, 2018 by Anne Brower

Not All Motor Graders Are Created Equal

This entry was posted in Graders, Milling Tools on May 29, 2018 by Anne Brower

Top 5 Reasons to Switch to a Grading System

More than 50% of roads in America have a gravel surface, making them a critical part of our transportation system. A grading system can improve road surface, is easier on equipment, safer with less downtime in the field, more versatile and is more cost-effective.

Here are the top five reasons you should switch to a grading system.

This entry was posted in Milling Tools, Graders on May 8, 2018 by Anne Brower

How To Get Peak Performance From Your Grading System

 Replaceable carbide-tipped milling tools consistently outperform standard grading blades but they must be installed, operated and maintained properly in order to provide maximum productivity and the lowest grading costs.

Use these tips to get peak performance from your carbide-tipped road grading system.

This entry was posted in Milling Tools, prevention, Graders on May 3, 2018 by Elissa Tennant
1

Recent Posts